Log in or Register for enhanced features | Forgotten Password?
White Papers | Suppliers | Events | Report Store | Companies | Dining Club | Videos
Green Power
Hydro
Return to: CTBR Home | Green Power | Hydro

Nass&Wind Industrie, Ifremer partner to test new offshore floating concepts

Published 13 March 2017

Nass&Wind Industrie and Ifremer as part of the ROTOR Project have joined hands to test offshore floating wind concepts during tank test campaigns.

Following the fixed offshore wind deployment in France, the French floating offshore wind industry is growing and technological developments are increasing. France’s objectives are among the most ambitious: to develop strong floating wind actors for the French market with the capacity to lead the international market. Floating wind is a key technology for the French marine energy development plan.

According to the French Renewable Energy Association (SER - Syndicat des Energies Renouvelables), six Gigawatts of floating wind capacities are expected by 2030. To reach this target, a first call for tender has been launched by the French Environment and Energy Management Agency (ADEME - Agence de l’Environnement et de la Maîtrise de l’Energie) for pilot floating wind farms: 4 consortiums have been selected on the 3rd of November 2016.

A strong partnership with complementary skills

Marine Structures Behavior laboratory co-project manager and engineer Dominique Le Roux said: “The ROTOR Project, supported by the Brittany region, is a step further for the collaboration between Nass&Wind Industrie and Ifremer, which has started in 2008 in the floating wind field. Our skills are complementary for this strong partnership.”

Marine Structures Behavior laboratory of Ifremer center in Brittany, located in Brest. Nass&Wind is bringing its well-known expertise in the field of wind turbine, naval architecture and control command system. Ifremer is a specialist for tank test campaigns, hydrodynamic and aerodynamic assessments, mechanical and electronic engineering as well as instrumentation.

Tank testing facilities

By the end of 2017, Nass&Wind Industrie and Ifremer will have at their disposal a tank test model able to test, optimize and certify any offshore floating wind concept with HAWT (Horizontal Axis Wind Turbine).

This model, developed with strong methodologies and innovative technological enhancements, will have the capacity and modularity to test any kind of floater type and control command strategy for a wind turbine range between 6 to 10MW.

A tank test campaign in October 2017

A full reduced scale model, with a rotor diameter around 3 meters, will be designed, built and tested during a tank test campaign at the Ifremer center in Brest in October 2017.

This model will consist in a modular floater with a nacelle equipped to test power and speed regulation by integrating control command strategy from the wind turbine manufacturers. Each blade will be designed with an individual pitch control system.

Nass&Wind Industrie project manager Cyril Bourgoin said: “Complex coupled behaviors between structure and wind turbine combined with wind and wave impact will be tested at a small scale and will allow us to validate control command strategies."

This model will be equipped with a full set of sensors. Data acquisition will give tremendous information for numerical models which are used in designing and optimizing full scaled offshore floating wind concept.



Source: Company Press Release